WRAP-BOX-2A1E
|
|
 More: Get Quote
Availability: Usually ships in 24h. (Out of Stock)
|
|
REVIEW: WRAP-BOX 2A1E with 2 Antennas, 1 Ethernet options for Outdoor Use
***ANTENNAS NOT INCLUDED
- Die-Cast Aluminum, IP 67 rating
- 2 waterproof N-type Antennas option
- Waterproof, quick disconnect RJ-45 connector
- 3 point silicone-rubber gasket
- Pole-top and wall-mount mounting options
- Fits Alix.3x and nano-ITX boards
- OEM brand can be applied in front (seria & ID in the back)
- manufactured by mini-box.com
- ROHS compliant
Download the free iMedia WRAP Linux distribution !
|
|
|
|
|
|
WRAP BOX is a great value outdoor case...
European customers please go to www.pcengines.ch, look for "Outdoor enclosure kit for WRAP.2C"
Industrial Die-Cast Aluminum Design
Designed to withstand the toughest environments, the WRAP-BOX outdoor enclosure is a small, light, yet very solid wireless outdoor enclosure. The WRAP-BOX is rated NEMA-67 providing complete protection against ingress of dust (6) as well as protection against immersion in water (7).
Multiple Antenna, Ethernet Options
The WRAP-BOX comes in 3 configurations:
1 N-Type connector + 1 RJ-45 quick disconnect (model 1A1E)
2 N-Type connectors + 1 RJ-45 quick disconnect (model 2A1E)
2 N-Type connectors + 1 RJ-45 quick disconnect (model 2A1E-3L) - all 3 holes on one side
4 N-Type connectors + 2 RJ-45 quick disconnect (model 4A2E)
The N-Type antennas connectors are placed as far as possible from each other in order to increase spatial diversity and decrease RF grounding from the mounting mast. Multiple Antennas can be used for repeater operation, multiple band or MIMO smart antenna applications.
2nd RJ-45 connector (available only on the 4A2E model) can be used as optional ethernet or console port.
Thermal Characteristics
- Enclosure Seal Operating temperature -60C to 230C
- Heat Trap: +6.5 Celsius under full sun (~100,000 Lux)
- Temperature raise using a 5-10Watt heat source (WRAP + radio board): +5.5 Celsius
Mechanical Characteristics
- Inside measurements: 180x125mm x 46mm
- Wall thickness: 3mm
- Supports masts up to 3" diameter
Board Support
- Native support for ALIX.3x boards
- Native support for nano-ITX boards
- Other boards types require mounting plate
Note: Outdoor Omni Antennas, N-type pigtails and wallmount bracket not included
|
|
|
|
|
|
| Related items for WRAP-BOX 2A1E
|
| |
|
|
|
|
|
|
|
|
|
|
|
Close
Notify me when this product becomes available:
|
|
