Note:

 Electronic components must meet the CE/FCC requirements need to me marked with "CE Certificate Of Conformance" compliance label. However, if electronic components are produced for further processing by industry (sub-assembly use), they do not need to observe the above mentioned CE/FCC requirements and consequently do not need any identification either.

This applies to the mini-BOX PSU boards as well as other boards, because these are not used as stand-alone devices for the general public.

However, our customers or our final products (such as the M-100) have been using our boards in successfull CE/FCC certifications, therefore, they can pass your CE/FCC examination.

Note about UL: Since most of our devices operate at 12V, UL certification is not necessary, unless you plan to operate your equipment above 50V.