M2-ATX, 160w output, 6v to 24v wide input Intelligent Automotive DC-DC Car PC Power Supply

M2-ATX-b350.png
Quantity:   
Availability
Usually ships in 24h

Volume quantity
Get Quote
Features
Smart Car PC Power Supply

- 160 watts output
- Ideal car Power supply for operating Core 2 duo, Celeron, AMD systems
- ATX, 6-24V wide input range
- Intelligent shutdown controller
- ON/OFF motherboard control
- Survives vehicle engine cranks
- Battery deep discharge prevention
- High efficiency, 160 watts output
- "Anti-Thump" Amplifier remote control - 15A automotive fuse (mini-blade)
- VIA, P4 and AMD CPU support
- manufactured by mini-box.com
- ROHS compliant version
Product Description
M2-ATX is an intelligent, high power, vehicle (car / boat / electric cart) 12V DC-DC ATX PC power supply designed for car pc and battery powered applications. Designed to provide power and to control the ON/OFF switch of a motherboard (car PC) based on ignition status, M2-ATX is a wide input (6 to 24V) vehicle / car / battery operated ATX power supply capable of surviving tough car engine cranks (down to 6V) as well as transient over-voltage situations. Just connect it to your car / boat / RV / solar battery and power up your PC!

The M2-ATX comes with complete cable harness consisting of:
- ATX cable extender plus HDD and Floppy power (9inch)
- Power input cable harness terminated in 0.25' fastons (12inch)
- 2 pin M/B on/off power ON control wire harness (9inch)
- set of LBJ (little black jumpers) to control various power sequencing schemes

(Optional)
- P4-12V to P4-12V cable (optional accessory)

M2-ATX has 8 user selectable microcontroller driven timing modes, allowing you to choose up to 8 ignition/shutdown car pc timing schemes via a built-in shutdown controller. By removing all user-selectable jumpers, M2-ATX becomes a traditional PC PSU with no ignition control (shudown controller bypassed) and it can be used in non-vehicle computer applications.

Even if your computer is totally OFF, a PC will still consume a few hundered milliwatts, needed to monitor PC ON/OFF status. When the computer (car pc) is in the suspend/sleep mode, it will consume even more power, because the RAM needs to be powered at all times. The power consumption in the suspend mode is few watts. No matter how big your car battery is, it will eventually drain your vehicle / car battery in a matter of days.

While in deep sleep mode, M2-ATX constantly monitors your car battery voltage levels, preventing deep discharge situations by automatically shutting down (using a built-in shutdown controller) until battery levels reach safe levels again. No more dead car batteries, no more computer resets during engine cranks, along with multiple timing schemes, small formfactor and very competitive price makes the M2-ATX the premier solution for dc-dc ATX vehicle / car PC power supply solutions.

M2-ATX is formfactor compatible with VoomPC-2 car PC enclosure and with most Casetronics and Morex enclosures and it is footprint compatible with the M1-ATX. The same version of microcode will run on both M1-ATX and M2-ATX.

NOTE: M2-ATX provides up to 8A on the 12V rail, making it ideal for operating most Core 2 duo, Celeron, AMD systems. Low power Geode and VIA processors (C3, C7) will work as well, leaving ample power for 12V or 5V peripherials (multiple 3.5" hard drives, CDROM, etc).

Other timing schemes / designs are possible. OEM / reseller integration is welcome. Please send en email to with your custom requirements.
Related Items

AC-DC-Barrel-Connector-s.jpg

AC/DC Barrel Connector

AC/DC Barrel Connector

- 145mm / 5.7in.
- 16AWG
- Female, Panel Mount, 2.5*5.5mm
- Connect Automotive PSUs with AC Adapters.
- Works with M2-ATX, M3-ATX and their HV counterparts.
- RoHS compliant


Price: $‎1.99
Quantity:   
P4-12VtoP4-12V-150.jpg

P4-12V to P4-12V Cable

P4-12V cable

- 220mm length (9in) end to end
- RoHS compliant


Price: $‎2.45
Quantity: